check it on level ground at those temps,if you INSIST on having it get hot drive it in manual... FYI the normal trans temp should stay around 185* generally if it is in the crosshatched I then checked the fluid level PROPERLY when the fluid was around 165 degrees. It was at the very top of the hot band.
Travel blog guest post
The torque converter is a fluid turbine drive and - like those on its predecessor transmissions, the TH350C, 700R4, 4L60, and 4L80E - features a lock-up pressure plate for direct mechanically coupled driving from the engine crank. As with earlier Hydramatics, the 6L80 will accept either the 258mm or 300mm torque converters. The 6L90
Enigmatica 2 expert vs normal
Add transmission fluid as needed and change if overheated or fluid turns clear/brown. If transmission runs hot cure with additional coolers. Add coolant to overflow bottle when cold, coolant will purge to proper level, check regularly. Replace cap every 2 years. Use . Stant. 10223 non lever 16 psi cap for use with overflow bottle.
Fire alarm sound effect app
Aug 20, 2014 · Fluid Control: Dexron High-Performance synthetic fluid was developed for the 8L90 for better cold performance. It is a lower viscosity than previous fluids, which allows for smaller passages ...
Which of the following products is not created by glycolysis
First, check the transmission fluid level with the engine off. Next, start the engine run the shifter through all the gears PRND while parked. Move back to Park and recheck the transmission fluid level. Transmission Fluid Level Changes - If the level has gone down when the engine is running, the pump is working.
Osbi background check
The tranny needes to be warmed up, then level checked and added as needed. getting the tranny to temp is hard, right temp that is. you can simply check on after driving for 5-15 min, then carfully toping the fluid all way through.